Tunner DVB-T2 LTC WiFi Terrestrial TV DVB3 + programmable RC H.265

Supported codecs: MPEG-1(layer III), MPEG-2 **@**.HL, MPEG-4 AVC/H.265 HP@L4, WMA, AQC3, AAC, Dolby Digital Plus#13#10Modulation: QPSK, 16QAM, 64QAM, 256QAM#13#10#13#10#13#10. Only a good HD set-top box will guarantee reception of all free-to-air DVB-T MPEG-4 digital terrestrial television broadcasts and the latest DVB-T and DVB-T2 digital terrestrial television systems. Support for modern compression method H.265 / HVEC allows you to maintain high image quality, while significantly reducing bandwidth. Built-in E-AC-3 (Dolby Digital Plus) audio decoder guarantees reception of sound on the TV. The device receives TV programs broadcast in Full HD 1080p resolution.#13#10#13#10. UNIVERSAL CONNECTORS The receiver can be connected to any TV set thanks to HDMI and traditional EURO connector. The decoder is equipped with a very sensitive head unit. Signal setting indicators allow correct antenna alignment. The device offers the possibility of powering an antenna amplifier through the decoder with the voltage of 5 V. Moreover, thanks to advanced multimedia functions and USB connection, user can watch movies, view photos and listen to music from external storage devices.#13#10#13#10. REMOTE CONTROL Another advantage of the set is a remote control equipped with 4 programmable buttons. This allows you to program one remote control to operate both the set top box and the TV, which makes it much easier to use both devices. Only one remote control is needed for full control. LTC tuner is a convenience and ease of use.#13#10#13#10BUTTON PROGRAMMING#13#10. The remote control can be programmed with 4 buttons: TV/AV, VOL-,VOL+,POWER. In order to program the buttons please:#13#101. Press and hold the "SET" button for 3 seconds until the red light in the Power button lights up steadily. 2. Briefly press the button to be programmed – the red light will flash. Point the remotes at each other and press the button whose function is to be copied to the remote.#13#103.The light on the remote control will blink and then go solid. This means that the remote has accepted the function and is ready to program the next buttons.#13#104. To program another button, repeat the operation from step number 2.#13#105.The "SET" button will turn off, and the remote control will switch from learning mode to normal operation mode.#13#10#13#10. ATTENTION! The tuner does not support broadcast resolution of 1920 x 540 pixels. This may cause problems or inability to receive some TV channels.#13#10#13#10Language menu: Arabic, Croatian, Czech, Danish, English, French, Georgian, German, Greek, Indonesian, Italian, Kazakh, Lithuanian, Malay, Persian, Polish, Portuguese, Romanian, Serbian, Spanish, Swedish, Tajik, Thai, Turkmen, Ukrainian, Uzbek.